DPSG Single Effect Distiller

WFI AND PURE STEAM PRODUCTION FOR PHARMACEUTICAL INDUSTRY

The BRAM-COR Single Effect Distiller Mod. DPSG is both a Still and a Pure Steam Generator. This equipment produces dry, saturated steam to be used as sterilizing agent.

The Pure Steam, when condensed through a Double Tube Sheet condenser, meets the requirements of international pharmacopoeias for Water-for-Injection. The system can therefore provide a simultaneous production of Pure Steam and Water for Injection.

Bram-Cor Single Efect Distiller

 

These equipment are traditionally installed in case of low capacities (since absorbing much energy and cooling water) and of budget constraints.

The production process consists in PW water evaporation followed by pure steam separation and condensation. The steam is purified using centrifugal and gravity separation methods.

The equipment is made in AISI 316L stainless steel for all parts in contact with the process fluid and steam, and it is designed according to ASME and European P.E.D. pressure regulation. All pipes are orbital welded when possible, with inert gas protection.

 

More over: 

  •     Active surfaces are passivated.
  •     The parts in contact with the pure steam are mechanically mirror polished (Ra ≤ 0.4 µm)
  •     The Skid is in stainless steel AISI 304 satin finished
  •     The Control Cabinet is in stainless steel AISI 304 satin finished 

 

BRAM-COR DPSG equipment is available in electrically or steam heated versions.